Bradford White water heater - Power Vent - 40 Gallon / 40,000 BTU

Bradford White water heater - Power Vent - 40 Gallon / 40,000 BTU

0 reviews Orders (0)
Product Code: RG1PV40S6N457
Availability: In Stock



Available Options

Item specifics

  • Household size 2 - 3 people
  • Fuel Type Gas
  • Capacity - Gallons 40
  • BTU 40,000
  • 1st Hour Delivery - Gallons 72
  • Vent Size 2"
  • Venting Power Vent
  • Height - Inches 57.5"
  • Diameter - Inches 20"
  • Weight - pound 140 pound
  • Energy Factor 0.66
  • Energy Star Rated No
  • Gas Connection 1/2"
  • Water Supply 3/4"
  • Recovery Efficiency 80%
  • Warranty 6 Yrs Limited Tank / 6 Yrs Limited on Component Parts

Product Description


  • All installations are made by a certified journeyman who has 30 yrs of experience.
  • All prices include delivery, installation and disposal of the old tank.
  • Well priced, convenient and short/pleasant shopping experience.
  • Not sure what water heater to pick, no problem,  we will gladly make a quick stop to help you out with a free of charge/commitment professional opinion.

Water heater details:

  • ENERGY STAR® Qualified—Some models meet or exceed requirements for ENERGY STAR® per the latest ENERGY STAR® criteria revision, as well as most utility rebate programs.
  • Powerful Blower Motor—Exclusively featuring the AquaVENT MAX™ from Fasco™ is the quietest blower motor in the industry. This new blower is a lower profile than previous versions and features a more robust electrical connection.

            - Ten Foot (3 meter) Power Cord—Included (120 VAC).

  • Horizontal and Vertical Venting—Designed for installations where atmospheric units cannot be used. Exhaust gases are vented under positive pressure directly out of the building through the roof or the wall with ULC S636 Approved PVC/CPVC or Polypropylene (Maximum equivalent vent length on reverse side).
  • Bradford White ICON System®—Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot. This results in savings of pilot gas during standby periods (120 VAC).

            - Enhanced Performance—Proprietary algorithms provide enhanced First Hour Rating and tighter temperature differential.

            - Advanced Temperature Control System—Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels.

            - Intelligent Diagnostics—An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting.

            - Pilot On Indication—Flashing green LED provides positive indication that pilot is on.

            - Separate Immersed Thermowell—High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve.

  • Advanced ScreenLok® Technology Flame Arrestor Design—Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater (excluding RG1PV55H6N & RG2PV75H6N).
  • Flammable Vapor Sensor—Electronic sensor prevents burner operation if flammable vapors are detected. The sensor will also prevent operation if there is ongoing flammable vapors burning inside the combustion chamber (excluding RG1PV55H6N & RG2PV75H6N).
  • Maintenance-Free—No regular cleaning of air inlet openings or flame arrestor is required under normal conditions (excluding RG1PV55H6N & RG2PV75H6N).
  • Sight Window—Offers a view into the combustion chamber to observe the operation of the pilot and burner.
  • Factory-Installed Hydrojet® Total Performance System—Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank.
  • Vitraglas® Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600°F (871°C).
  • Insulation System—Non-CFC foam covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
  • Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections.
  • 3/4" (19mm) NPT Side Connections—(RG2PV50H6N, RG1PV55H6N, and RG2PV75H6N only).
  • Factory-Installed Heat Traps—Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation.
  • Protective Magnesium Rod—(RG1PV55H6N has 2).
  • T&P Relief Valve—Installed.
  • Thermostatic Mixing Valve (ASSE Approved)—Included (RG1PV55H6N only).
  • Low Restrictive Brass Drain Valve—Durable tamper proof design.
  • NOx Emissions—Less than 40 ng/J.

Write a review

Note: HTML is not translated!
    Bad           Good

All installations are secured by professional installers.

 At the selected date & time one of our professional installers will come the indicated address to perform the installation. 


Installation service level:

1. Deliver the product.

2. Inspect the existing installation.

3. Assure compatibility of your new product.

4. Remove the old product.

5. Install the new product.

6. Verify the installation to ensure that the product is working properly.

7. Remove the packaging and the old product -If permitted- from premises.

* Any needed adapters, connectors, hardware, etc. that are does not come with the purchased product will be invoiced by the installer.

The installer will not proceed without your approval.

** Our included installation pricing covers a direct products swap, any work that might be required beyond the swap scoop of work will be determined and quotes separately by the installer.

The installer will not proceed without your approval.